Hayward Pool Pumps are indeed the pumps that are used in the
swimming pools to pump the water in and out of the swimming pool. Hayward is
the leading company that provides equipments for the swimming pools and spas
and also other aquatic entertainment. They are well known for their
dependability and also for their best performance. Most of the people opt for
this brand of pool pumps because of the high quality of the products that offer
the customers. They provide the most energy efficient pumps at any speed
according to the user requirement. These pumps are used to pump in fresh and
purified water and eliminate the dirty water from the swimming pool. There are
twp types of pool pumps available. They are above ground pumps and in ground
pumps.
The above ground Hayward Pool Pumps works similar to the in
ground pool pumps with only one exception. The difference between the in ground
pool pump and the above ground pool pump is that in the above ground pool pump
the water supply level should be higher than the inlet to the pump. The above
ground pool pumps do not have diffusers with them and thus they can not pull
the water. This type of pump is also called as flooded suction pump because the
water flows in as a flood to the pump’s strainer basket. These pool pumps are
well known for the best efficiency rate of the pump.
Hayward pool pumps provide high performance that helps in
increasing the customer satisfaction levels to a great extent. The in groundpool pumps from Hayward is also called as the self priming centrifugal pumps.
These pumps consist of the vacuum chamber also called as the pump housing.
Initially this pump housing should be filled with water to create the vacuum.
This will help for pumping the water out of the swimming pool. The pump housing
always contain full of water when the pump is ON and also contains partially
full water when the pump is in OFF condition.
These pumps are simple in design. The motors that are
located spin at the different speed levels. The speed of the spinning of the
motor can be changed according to the needs of the user. It helps in
eliminating any air approaching into the pump housing from the suction piping.
A full prime condition occurs when the bubbles stop returning to the pool and
the pump basket consists of full of water. When the pump reaches the full prime
then the filter pressure will also increase rapidly. The gallons per minute
(GPM) varies with various factors such as type of pump, horsepower, pipe size,
distance from pool and other restrictions within the plumbing system.
The Hayward Pool Pumps should never be operate without
water. If the pump is running without water, the seal will overheat and melt.
If this is left un noticed then this will result in the damage of many system
components including the PVC pipe.
No comments:
Post a Comment